Cleanroom crane product structure
The clean room crane
includes: the main beam, the end beam and the hoisting mechanism. The structural part, the end beam and the main beam of the crane hoisting mechanism are all made of stainless steel. The end beam is equipped with an air purification device and a suction nozzle of the air purification device. Installed at the main beam wheel. The wire ropes and pulleys used in the hoisting mechanism are made of stainless materials, and the hoisting wire ropes and pulleys are sealed in the dust cover.
Clean and dust-free cranes are required for the operating environment, such as aerospace, precision electronics factories, sterile pharmaceutical workshops, food manufacturing, etc.
Daily maintenance work:
1. Make a careful and in-depth inspection of the crane wire rope or chain in the clean room workshop every month, and check whether the wire rope or chain is broken, and whether the lubricating oil is lost or invalid. In order to prevent the broken wire rope or chain from breaking other wire ropes or chain, it is necessary to handle the broken wire rope or chain;
2. Make a visual inspection of the crane wire rope or chain in the clean room workshop once a week.
3. The wire rope or chain of the crane in the clean room workshop cannot be overloaded to prevent extrusion deformation and avoid severe impact and vibration.
4. For the wire rope or chain of the crane in the clean room workshop, there are individual wire ropes or chains that do not twist. If they are not fixed properly, the torsion will be out of balance, and there will be a bird cage phenomenon when it is close to the anchoring end, so it should be cut off in time, otherwise it will affect the whole The service life of a wire rope or chain.