Matters needing attention after the clean room crane is used

After the clean room crane is used, it should be placed on the side of the wall to prevent unnecessary operations. The power can also be cut off to prevent unrelated staff from arbitrarily manipulating the handle below. The next thing that needs to be done is to sort out the items on the hook to ensure that there is no debris left on the hook. Cleaning cranes should do a good job in handover work, especially in some busy workshops, which may be used back and forth many times. Any problems in the process of hoisting heavy objects should be listed on the handover list one by one.
Clean room cranes are treated with care regardless of the size of the equipment. If it has an operating room, it is even more necessary to protect the items in the operating room, keep the interior clean, and keep the handle on the console reset at all times. Remember to lock it after you get off, and then turn off the power.
The key parameters of the clean crane are composed of several sets of data such as the lifting weight, the span of the main beam, the lifting height, and the length of the track. The lifting weight is 1t, 2t, 3t, 5t, 10t, 16t, 20t, 32t, the span of the main beam is 7-30 meters, and the lifting height is 6-15 meters. The length of the track refers to the length of the operator's carriage, which is used to calculate all the indoor tracks, calculate the power supply for the cart according to the track, and install the sliding line. The self-weight of the Nanjing clean crane is changed according to the difference in the span of the main beam, and the length of the end beams on both sides is changed according to the tonnage of 1-20t.