Regular inspection of the chain type of the load turning device for looseness and lubrication

The lubricating oil of the reducer should be replaced in time according to the usage. If the ambient temperature is lower than 0℃, it must be replaced with the lubricating oil of the corresponding label.
The drive chain should always be properly tensioned and lubricated.
Regularly clean up the garbage inside the equipment.
Check the limit switch once every shift to observe whether it is shifted or loose.
Regularly check whether all the fixing bolts of the equipment are loose and emerging.
Regularly check whether the motor, reducer, chain, and sprocket are loose.
Can be customized accroding to your needs.