Safety inspection requirements for photovoltaic cleanroom cra
Photovoltaic clean room cranes are currently widely used lifting equipment in the photovoltaic industry, but when we use photovoltaic clean room cranes, we must do a good job in the inspection of photovoltaic clean room cranes to ensure stable and reliable performance of photovoltaic clean room cranes. , so that the photovoltaic clean room crane can operate safely and normally. So what are the safety inspection requirements for photovoltaic clean room cranes? Let's take a look at it below.
1. When the photovoltaic clean room crane is repaired and maintained, it is necessary to debug each safety device to ensure its reliable performance, check the tightness of the brake, and adjust it to a better state.
2. When inspecting the photovoltaic clean room crane, it is necessary to check whether the pin shaft clamping plate, nut, connecting plate, etc. of the photovoltaic clean room crane are in good condition and whether there is any looseness. If there is looseness, it should be replaced in time.
3. It is necessary to check the winding condition of the wire rope of the photovoltaic clean room 1 crane on the reel, and check whether there is any situation such as job-hopping, overlapping, loosening or missing, etc., and replace it in time if the above conditions are found.
The above is a brief introduction to the safety inspection requirements of photovoltaic clean room cranes. I hope that everyone must do a good job of safety inspection of photovoltaic clean room cranes when using photovoltaic clean room cranes to ensure that photovoltaic clean room cranes can operate stably and reliably. Kunfeng Heavy Industry has been focusing on the production of lifting equipment for more than ten years. Our company has strong strength, excellent equipment and abundant talents. The photovoltaic clean room cranes produced can meet the needs of different users and are your good assistants for lifting operations. Welcome to inquire! We will serve you wholeheartedly!