Email:vip@kfqizhongji.com

News

Suspension type load turning device

Suspension type load turning device adjustable turning machine can be divided into chain load turning device and belt load turning device according to the different spreaders used. Spacing can be adjusted! The adjustable load turning device can adapt to the engineering overturning requirements of goods of different specifications, and provide process transportation safely, smoothly and effectively. Yancheng Suspension Turnover Machine is widely used in metallurgy, stamping, sheet metal, mold, papermaking, refrigeration, steel belt, reel, barrel, coil and other industries. The equipment uses a 380V three-phase power supply, turn on the power supply when in use, and operate the remote control to test whether the action is normal. When the object is rotating, the quick joint of the hoisting belt should be rotated to the upper part of the front to prevent the joint from being squeezed into the inside of the sheave. Before the hoisting is turned over, the hoisting object should be tested to see whether the hoisted object is hoisted in balance, and if it is unbalanced, it should be adjusted to the best balance position. So as not to cause the hoisting object to tilt and slip. Long-term hoisting and flipping - When an irregular object is to be hoisted and flipped, the length of the chain should be customized according to the shape of the object (the two hoisting belts can be of different lengths), but the object must be kept balanced before it can be hoisted and flipped.

In the process of turning the frame turning machine with load, depending on the overall mass of the frame assembly and the change of the position of the center of gravity, the dynamic load completely becomes the symmetrical alternating stress. However, in the vehicle assembly line, the same model and the same quality frame are often assembled in batches. Yancheng suspension type turning machine makes the dynamic load symmetrical alternating stress and has more balanced load characteristics. Although both dynamic and static loads have their own time intensities, they all have some similarities! The workpiece turning machine is an indispensable turning machine mechanism for workshop production!