| DRS traveling wheel blocks supporting the reciprocating movem
European DRS walking wheel blocks are mechanical equipment consisting of wheels and axles, bearings and bearing blocks. It is a device used to support the crane and the load, and make the crane recip
CATEGORY:
CREATED:
Apr 13, 2022
DRS traveling wheel blocks supporting the reciprocating movement of the crane on track
European DRS walking wheel blocks are mechanical equipment consisting of wheels and axles, bearings and bearing blocks. It is a device used to support the crane and the load, and make the crane reciprocate on the track. So what are the advantages of DRS wheel blocks?
European DRS wheel blocks are made of ductile iron, which has been precision processed and surface hardened. It has high strength, good corrosion resistance, vibration damping and wear resistance, and the wheel surface is self-lubricating. Maintenance-free design, long service life, easy installation, modular combination, light weight, small size, compact structure, large carrying capacity, high assembly accuracy, stable operation, low noise, etc.
At present, European DRS walking wheel blocks have been widely used in lifting equipment such as single-beam cranes, double-beam cranes, and gantry cranes, and have been well received by users! Due to the characteristics of this wheel set, the wheel set will be more and more widely used in modern engineering operations.
The KUNFENG DRS wheel blocks for the low maintenance direct drive and the slip-on gear mechanisms of different manufacturers in construction sizes 160, 200, 250,, 315, 400 and 500 perform as a ready-to-install travel unit assume the multi-faceted transport requirements for conveyer related systems in the entire field of machine construction.
The KUNFENG DRS wheel blocks in construction sizes 160, 200, 250, 315, 400 and 500 with high wheel loads and wide-ranging connection possibilities perform as ready-to-install travel units assume the multi-faceted transport requirements for conveyer related systems in the entire field of machine construction. Drive shafts, which are suitable for all gear manufacturers, can be delivered. The wheel blocks can be used within the temperature range from -30° to +200°C as well as in explosion risk areas. The lubrication, crane wheel materials and drive systems can be adapted individually to the case of use. Accessories for KUNFENG DRS wheel blocks such as, for example, roller guides and cellular buffers can be also obtained from us.
