The treatment of the cast iron roller core is also one of the keys to prevent the polyurethane rubber roller from falling out of the core

 The treatment of the cast iron roller core is also one of the keys to prevent the polyurethane rubber roller from falling out of the core
 The treatment of the cast iron roller core is also one of the keys to prevent the polyurethane rubber roller from falling out of the core

| The treatment of the cast iron roller core is also one of the keys to prevent the polyurethane rubber roller from falling out of the core

description:
Cast iron roller core for treating polyurethane rubber roller degumming.
category:
News
created:
Dec 09,2020
tags:
Cast iron roller core for treating polyurethane rubber roller degumming
Cast iron roller core used to deal with polyurethane rubber roller degumming:
The treatment of cast iron roller core is also one of the keys to prevent polyurethane rubber roller from being de-cored. To ensure a good combination of the polyurethane elastomer and the iron core, it is necessary to clean the iron core, such as pickling to remove rust, organic matter to remove oil, etc., to ensure that its surface is clean and free of dirt.
   Mechanical sandblasting is usually one of the effective ways to improve the bonding strength. Through sandblasting, the surface roughness of the roller core is increased, and the surface area of ​​the bonding interface can be increased several times or even dozens of times, and the bonding force between the polyurethane and the metal core is correspondingly improved. The uneven surface produced by sandblasting will cause more occlusal connection between the polyurethane and the iron core and improve the bonding strength.
   Improper method during the pouring process of the rubber roller will form bubbles on the surface of the iron core and reduce the bonding strength. Because the pouring time is limited, it is necessary to shorten the pouring time as much as possible, but also to ensure that the pouring is even, to prevent excessive pouring, otherwise it will cause bubbles in the material and improper pouring, resulting in bubbles on the surface of the iron core, which greatly reduces the adhesion. strength. When pouring, ensure that the polyurethane casting material has a period of fluidity after it is put into the mold, so that the residual bubbles will float up.
Can be customized accroding to your needs.

Related products

DRSA160 wheel block system

DRSA160 wheel block system

DRSA160 wheel block has good starting and braking performance, which makes the walking wheel run smoothly on the track. In addition, specially designed ribs ensure high rigidity of the wheel block bod

Clean room semi-gantry crane

Clean room semi-gantry crane

The clean room semi-gantry crane has the characteristics of dustproof, anti-staining and anti-pollution.

China European type end Carriage

China European type end Carriage

Our crane end beams are available in a variety of designs with a high degree of flexibility to ensure reliable operation.

Clean Room Portable Gantry Crane | Custom Crane

Clean Room Portable Gantry Crane | Custom Crane

For freestanding clean room cranes, it may not allow you to be able to move around easily and freely, while the portable cleanroom gantry crane allow more adjustable movement.

Belt Load Turning Units for Materials Handling

Belt Load Turning Units for Materials Handling

KUNFENG® turning units is an innovative design for safe lifting and load turning. The radio remote control makes operation safer, especially suitable for very long and bulky goods.

Crane end beam manufacturer

Crane end beam manufacturer

We are a professional crane manufacturer, we produce high quality end beams, crane end beams are exported to different countries.